ƒƒ• Wireless performance of up to 300 Mbps on IEEE 802.11n  on Single Band

• Support self-configuring cluster  to enable effortless provisioning

• Up to 16 virtual access points (VAP) may be created from a single Access Point

ƒƒ• Automatic load-balancing among neighboring Access Points

• Up to 16 SSIDs  to assign different access privileges to different groups

• ƒƒƒƒFacilitate scaling up of network to  support hundreds of Access Points

• Support Load balancing to optimise high network traffic volume and redundancy

• Automatic RF Adjustment and management in densely AP deployment

- 1000BASE-SX port (IEEE 802.3z standard) - Duplex LC connector - Full duplex operation - 802.3x flow control support - Fiber type: 50um or 62.5um multi-mode fiber up to 550 m - Wave length: 850nm - Power support: 3.3V - Hot pluggable - Class 1 laser product complies with EN 60825-1 - TTL signal detect indicator - Metal enclosure for lower EMI

• IEEE 802.11 AC wireless standard with up to 1200 Mbps Speed

• Concurrent Dual Band operation for Increase Network Capacity

• Gigabit LAN with 802.3af Power over Ethernet support

• Automatic Network Traffic Prioritization with WMM QoS Feature

• Support Up to 26 dBm high power design

• Band Steering and Bandwidth Optimization support

• Multiple operating modes - AP, (WDS) with AP,WDS/Bridge & Client

• Support AP Array and Central WiFi Manager (CWM)

• Network Access Protection (NAP)

• 48 Port 10/100 Base-T POE Switch with 2 x 10/100/1000 Base-T Ports

• Support 2 x 10/100/1000 Base-T/SFP Combo Slots

• IEEE 802.1Q Virtual LAN (VLAN)

• Support  IGMP and MLD Snooping

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

• Four Gigabit Ethernet port with one hard Drive Extension Slot • Manage up to 64 wireless APs and upgradable to 256 APs per controller • Manage up to a maximum of 1024 APs in a Controller cluster • Self-healing and self-optimizing technology combined with 4+4 wireless controller redundancy and RF scanning • Concurrent Captive Portal for authentication users in wired or wireless deployment • Centralized RF,Security , Firewall, VPN, Content Filtering and Policy Management • Support 802.1x port-based access control and guest VLAN • Wireless Intrusion Detection & Prevention System (WIDS)

SFP Transceiver 1 Port 10GBASE-LRM (with DDM) for multimode fiber optic cable, power supply 3.3V (up to 200m)

• 8 Port 10/100 Base-T POE Switch

• Support IEEE 802.3af POE Standard

• IEEE 802.1Q Virtual LAN (VLAN)

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

•  Up to 300 Mbps Wireless Speed Performance on IEEE 802.11n Single Band

•  Support self-configuring cluster  to enable effortless provisioning

•  Up to 16 virtual access points (VAP) may be created from a single access point

•  Up to 16 SSIDs  to assign different access privileges to different groups

•  802.3af Power Over Ethernet enables installation at hard to reach locations

•  Support Dynamic Auto-Channel Selection in Standalone Mode

•  Support Load balancing to optimise high network traffic volume and redundancy

•  Automatic RF Adjustment and management in densely AP deployment

•  High combined data rates of 1167 Mbps (AC 867 Mbps + N 300 Mbps) over the air

• Beamforming technology Bandsteering for efficient traffic management

• Support 8 units to form a  self-configuring cluster  to enable effortless provisioning

• Up to 32 virtual access points (VAP) may be created from a single access point

• WMM Quality of  Service (QOS) makes an ideal AP for audio, video, and voice application.

• Up to 16 SSIDs  per frequency band and 32 SSIDs per AP

• 802.3at Power Over Gigabit Ethernet enables installation at hard to reach locations

• Support Dynamic Auto-Channel Selection in Standalone mode

• Support Load balancing to optimise high network traffic volume and redundancy

• Automatic RF Adjustment and Auto Power management in densely AP deployment

High performance, flexibility, fault tolerance, and advanced software features for SMBs, SMEs, large enterprises, and ISPs.

• 20 x SFP ports • 4 x Combo 10/100/1000BASE-T/SFP ports • 4 x 10G SFP+ ports • 6 kV surge protection on all RJ-45 access ports • Switch Resource Management (SRM) for flexible management of system resources • Redundant Power Supply (RPS) support • MPLS L2VPM/L3 VPN support • Full L3 routing protocol support including OSPF, BGP, and ISIS for IPv4/IPv6 • SDN-enabled switch, compatible with Openflow 1.3

Enjoy High-performance Wireless Connectivity - Harness the power of IEEE 802.11ac Wave 2 wireless and experience wireless speeds of up to 1300 Mbps, perfect for high-demand business applications MU-MIMO with Beamforming - Dramatically improves the wireless range and performance as well as allowing multiple devices to connect simultaneously to the wireless network Multiple Operational Modes -Flexible options allows the DAP-2610 to function as an access point, a Wireless Distribution System (WDS), a WDS with access point, or a wireless client

• Up to 1750 MBPS high-speed wireless performance on 802.11ac standards

• Support Wireless Speed of 450 MB over 2.4 GHz & 1300 Mbps  Over 5 GHz band

• Support load balancing to ensure maximum performance by limiting user  per AP

• Support Wi-Fi Multimedia QoS for audio, video, and voice applications

• Six detachable antennas for optimal wireless coverage over 2.4 GHz  or 5 GHz band

• Two Gigabit LAN ports , One Port Support 802.at Power over Ethernet

• Support multiple operation - AP, WDS with AP, WDS/Bridge and Client

• Rugged  metal housing &  Plenum-rated chassis

• Built in Radius Server  allowing users to create their accounts within the device itself.

• 20 Ports 10/100/1000 Base-T PoE  with  4 Combo 10/100/1000 Base-T POE /SFP ports

• Support Optional Redundant Power Supply and Smart Fans

•  Support IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) with 370W Power Budget

• Support  ITU-T G.8032 Ethernet Ring Protection Switching (ERPS),

• Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM)

• Support 802.1 ag Connectivity Fault Management (CFM) and  802.3 ah Ethernet OAM

• Support 802.1 V protocol VLAN, ISM VLAN,  Double VLAN (Q-in-Q) and Selective Q-in-Q

• D-Link Single IP Management (SIM) simplifies and speeds up management

• Built-in 2 x 10G CX4 Stacking  Ports, Stackable up to 6 Units, support 40G Stacking bandwidth

• Comprehensive Security – Multi-layer and Packet Content (ACL), (IMPB) with DHCP Snooping

• Identity Driven Network Policies such as 802.1X,  WAC, and MAC-based Access Control (MAC)

Bidirectional SFP Transceiver 1 Port 10GBASE-LR (without DDM) for singlemode fiber optic cable, power supply 3.3V (up to 20km), WDM (TX: 1270nm, RX: 1330nm)

Bidirectional SFP Transceiver 1 Port 10GBASE-LR (without DDM) for singlemode fiber optic cable, power supply 3.3V (up to 20km), WDM (TX: 1330nm, RX: 1270nm)

• 24-Port POE 10/100 Base-T + 2 Port Gigabit Ethernet +2 Combo 10/100/1000 Base-T/100/1000 SFP

• Support IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)

• Support  ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)

• Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM)

• Resilience and Performance Enhancement features like MSTP, QoS  and  CoS

• Support 802.1 ag Connectivity Fault Management (CFM) and  802.3 ah Ethernet OAM

• Dying Gasp, and D-Link Unidirectional Link Detection (DULD) functions

• D-Link Single IP Management (SIM) simplifies and speeds up management

• Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface

• ISM VLAN sends multicast streams in a multicast VLAN to save bandwidth in the backbone network

• Support 802.1 V protocol VLAN, Double VLAN (Q-in-Q) and Selective Q-in-Q

• 16 x 10/100/1000BASE-T ports • 2 x Gigabit SFP ports • 2 x 10G SFP+ ports • Layer 2 management and security with Layer 3 capabilities • Static Routing and MSTP

• Blazing performance  reaching up to 1 Gbps of network throughput

• 2.4 GHz 802.11n supports up to 300 Mbps and 5 GHz 802.11ac supports up to 867 Mbps

• IP 67-compliant housing to withstand very harsh weather conditions

• Up to 32 virtual access points may be created using a single access point

• Support up to 16 SSIDs  per frequency band and 32 SSIDs per AP

• Automatic load-balancing between linked Access Points

• Flexible Wi-Fi QoS schemes, allowing for controlled and balanced access

• Supports 802.3at Power over  Gigabit Ethernet to be installed in remote locations

• Support Dynamic Auto-Channel Selection, Automatic RF Adjustment and Auto Power management

 

• Full HD 1080p, 30 fps
• 3-Megapixel sensor, supporting resolution up to 2048 x 1536
• Day and night with ICR filter and IR LED
• 10m night vision
• Wide Dynamic Range
• 3D Noise Reduction
• Supports Power over Ethernet

This media converter combines transmit and receive signals onto one fiber strand using two wavelengths. This design avoids the budget losses incurred by the single-wavelength single-fiber technology, and minimizes the possibility of reflections in the system

• Standard Compliance
• Compliant with IEEE 802.3z Gigabit Standard
• Self-contained in Standard Small Form Pluggable (SFP) Package
• Simplex LC Connector
• Interoperable with D-Link Switches
• Long-Distance Fiber Application
• Maximum 10 km Fiber Cable Distance (DEM-330T/330R)
• Maximum 40 km Fiber Cable Distance (DEM-331T/331R)
• Use Single-mode Fiber Cable
• Use Single Fiber Strand for Transmission/Reception
• Optimal Bidirectional Operation
• Gigabit Operation
• Bidirectional Operation Using Separate Transmit and Receive Wavelengths
• Versatile, Sturdy Devices
• Single 3.3V Power Supply
• Hot Swappable
• Durable Metal Enclosure

• Standard Compliance
• Compliant with IEEE 802.3z Gigabit Standard
• Self-contained in Standard Small Form Pluggable (SFP) Package
• Simplex LC Connector
• Interoperable with D-Link Switches
• Long-Distance Fiber Application
• Maximum 10 km Fiber Cable Distance (DEM-330T/330R)
• Maximum 40 km Fiber Cable Distance (DEM-331T/331R)
• Use Single-mode Fiber Cable
• Use Single Fiber Strand for Transmission/Reception
• Optimal Bidirectional Operation
• Gigabit Operation
• Bidirectional Operation Using Separate Transmit and Receive Wavelengths
• Versatile, Sturdy Devices
• Single 3.3V Power Supply
• Hot Swappable
• Durable Metal Enclosure

Convenience • Two attached USB and audio cables to connect two PCs • Remote toggle button • Hotkey commands Input • Two USB ports for one USB mouse and USB keyboard • Microsoft IntelliMouse support Video • VGA connector • Supports multiple monitor resolutions Audio • Audio port • Stereo support

• 10GBASE-LRM Small Form-factor Pluggable Plus (SFP+).
• Standards based 10-Gigabit Ethernet (10GBASE-LRM).
• 10 Gbit/sec line speed.
• Operating distance up to 300m on OS1 fibre or 220m on OM2 fibre.
• Transmitter wavelength 1310nm.
• Industry-standard LC duplex connector.
• Singlemode and Multimode Fibre (SMF/MMF).
• Digital Optical Monitoring (DOM).

High-performance switch delivering wire-speed 10-Gigabit switching, routing, and ultra-low latency.

• 20 x 10GBASE-T ports • 4 x 10GBASE-T/SFP+ Combo ports • Physical stacking with up to 4 devices per stack • Layer 2+ static routing / RIPv1/v2/ng • Optional Layer 3 dynamic routing / OSPF • Data Center Bridging (DCB) features • Hot-swappable power supplies and fan modules