Q:How do I install my network adapter in windows 10? A:Some D-Link adapters require you to install D-Link drivers and some require you to just plug the adapter into your computer to have it automatically install.
Please select your adapter model below and follow the correct installation method: Important: Please note the correct hardware version. It will be located on the back of your adapter marked with H/W.
Step 2: Windows will automatically start installing the drivers
Step 3: Once complete, at the bottom right corner of your screen, click on the wifi icon to scan and connect to your wireless network
PCI Plug and Play Installation Steps Step 1: Power down your computer, unplug it and insert the adapter
Step 2: Power on the computer and log into Windows
Windows should automatically detect the adapter and start installing your adapter
Step 3: Once complete, at the bottom right corner of your screen, click on the wifi icon to scan and connect to your wireless network
Installing the D-Link Driver Step 1: Download the correct driver for your wireless adapter (See above) Step 2: Plug the adapter into your computer
Step 3: Launch the setup installer- Click next to begin
Step 4: Click Next
Step 5: Click Next
Step 6: Select the method for connecting to your wireless signal and click next
Step 7: Click on the scan button to scan for your wireless network
Step 8: Select your wireless network and click next
Step 9: If your wireless network is security enabled
(Password Protected) you will be prompted to enter your wireless
password. Enter it and click next.
Step 10: The adapter will now connect to your wireless network
Step 9: You should now be connected to your network and the setup and installation is complete.