Question : How do I configure DHCP server on my wireless router?

This FAQ is for the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-774, and DI-784.

Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter.

Step 2 The default username is admin (all lower case) and the password is blank (nothing). Click OK.

Step 3 Click on the Home tab and then click on DHCP to the left.



Note: If you are connecting to a DHCP server, the DHCP server on the wireless router should be set to Disabled.

Step 4 By default, DHCP Server is set to Enabled. To disable it, click the Disabled radio button. To enable it, click the Enabled radio button.

Step 5 Enter the Starting IP Address and Ending IP Address. To change the lease time, select a value from the drop-down list next to Lease Time.

Note: The value for Starting IP Address must be less than the value for Ending IP Address.

Step 6 Click on Apply then click Continue to save the settings.